Maykestag :: HSS Frézy
SLOT END MILLS, SHORT
SERIES, TWO FLUTES,
CENTRE CUTTING,
DIN 327 D
Range of application:
Recommended for milling in materials
with medium and high tensile strength up
to 1.200 N/mm2. Vertical cutting to full depth
and horizontal cutting with exact tolerances.
Maykestag :: HSS Frézy
HPT SLOT END MILLS,
SHORT SERIES, TWO FLUTES,
CENTRE CUTTING,
DIN 327 D
Range of application:
Recommended for milling in materials
with medium and high tensile strength up
to 1.300 N/mm2. Vertical cutting to full depth
and horizontal cutting with exact tolerances.
Maykestag :: HSS Frézy
SLOT END MILLS, LONG
SERIES, TWO FLUTES,
CENTRE CUTTING
Range of application:
Recommended for milling in materials
with medial and high tensile strength up
to 1.200 N/mm2. Vertical cutting to full depth
and horizontal cutting with exact tolerances.
Maykestag :: HSS Frézy
SLOT END MILLS, SHORT
SERIES, THREE FLUTES,
CENTRE CUTTING
Range of application:
Recommended for milling in materials
with medial and high tensile strength up
to 1.300 N/mm2. Vertical cutting to full depth
and horizontal cutting with exact tolerances.
Maykestag :: HSS Frézy
HPT SLOT END MILLS,
SHORT SERIES, THREE
FLUTES, CENTRE CUTTING
Range of application:
Recommended for milling in materials
with medial and high tensile strength up
to 1.300 N/mm2. Vertical cutting to full depth
and horizontal cutting with exact tolerances.
Maykestag :: HSS Frézy
SLOT END MILLS, LONG
SERIES, THREE FLUTES,
CENTRE CUTTING,
DIN 844 B
Range of application:
Recommended for milling in materials
with medium/high tensile strength up to
1.300 N/mm2. For producing slots with large
depth and accurate fits. High efficiency in chipping
and a smooth run result in an excellent
quality surface
Maykestag :: HSS Frézy
SLOT END MILLS WITH
RADIUS, SHORT SERIES,
TWO FLUTES,
CENTRE CUTTING
Range of application:
Recommended for milling in materials
with medium/high tensile strength up to
1.100 N/mm2. For horizontal milling,
especially suited for copy milling.
Maykestag :: HSS Frézy
SLOT END MILLS WITH
RADIUS, LONG SERIES,
TWO FLUTES,
CENTRE CUTTING
Recommended for milling in materials
with medium/high tensile strength up
to 1.200 N/mm2. For horizontal milling,
especially suited for copy milling.
Maykestag :: HSS Frézy
MINI END MILLS,
THREE FLUTES,
CENTRE CUTTING
Range of application:
Plunge milling to full depth or with gradual
feed; also for conventional face and peripheral
milling.
Maykestag :: HSS Frézy
STUB END MILLS, EXTRA
SHORT SERIES, FOUR
FLUTES, CENTRE CUTTING
Range of application:
Finishing with high cutting performance and
excellent surface quality by steels with medium
to high tensile strength up to 1.300 N/mm2
(for example structural, case-hardening, heattreatable
steels); non-ferrous metals, stainless
and acid resistant steels. Climb milling preferred.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
DIN 844 B
Range of application:
Finishing with high cutting performance and
excellent surface quality by steels with medium
to high tensile strength up to 1.300 N/mm2
(for example structural, case-hardening, heattreatable
steels); non-ferrous metals, stainless
and acid resistant steels. Climb milling preferred.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
CENTRE CUTTING,
DIN 844 B
Range of application:
Wide range of applications on materials with
low strength up to materials difficult to
machine, having a high toughness, for example
structural steels or alloyed tool steels. Also
including non-ferrous metals, cobalt- and
nickel-alloys, as well as titanium and titaniumalloyed
materials.
Maykestag :: HSS Frézy
HPT MILLS, SHORT
SERIES, CENTRE CUTTING,
DIN 327 DB
Range of application:
Universal multi-flute end mill, made from new
substrate SPM with extreme high content of
cobalt. It combines the hardness of solid carbide
and the toughness of powder-metallurgical
steel. Due to its universal geometry this end
mill is suitable for various materials.
Maykestag :: HSS Frézy
HPT END MILLS, SHORT
SERIES, CENTRE CUTTING,
DIN 844 B
Range of application:
Made from powder-metallurgical steel for
using at extreme cutting conditions for long
continuous utilisation.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
CENTRE CUTTING,
DIN 844 B
Range of application:
Finishing with high cutting performance and
excellent surface quality by steels with medium
to high tensile strength up to 1.200 N/mm2
(for example structural, case-hardening, heattreatable
steels); non-ferrous metals, stainless
and acid resistant steels. Climb milling preferred.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
THEE FLUTES, CENTRE
CUTTING, DIN 844 B
Range of application:
Plunge milling to full depth or with gradual
feed; also for conventional face and peripheral
milling.
Maykestag :: HSS Frézy
END MILLS, LONG SERIES,
CENTRE CUTTING,
DIN 844 B
Range of application:
Wide range of applications on materials with
low strength up to materials difficult to
machine, having a high toughness, for example
structural steels or alloyed tool steels. Also
including non-ferrous metals, cobalt- and
nickel-alloys, as well as titanium and titaniumalloyed
materials.
Maykestag :: HSS Frézy
END MILLS, LONG SERIES,
DIN 844 B
Range of application:
Finishing with high cutting performance and
excellent surface quality by steels with medium
to high tensile strength up to 1.300 N/mm2
(for example structural, case-hardening, heattreatable
steels); non-ferrous metals, stainless
and acid resistant steels. Climb milling preferred.
Maykestag :: HSS Frézy
HPT END MILLS, SHORT
SERIES, FOUR FLUTES,
CENTRE CUTTING,
DIN 844 B
Range of application:
End mills, high helix angle, made from powdermetallurgical
steel for extreme cutting
conditions for long continuous utilisation.
High contour accuracy due to low deflection,
smooth milling operation because of low
vibration in tendency, excellent surface quality.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
CENTRE CUTTING,
DIN 844 B
Range of application:
Recommended for milling in soft as well as in
tough, long chipping materials such as Al- and
Cu-alloys as well as in thermo plastics.
Maykestag :: HSS Frézy
END MILLS, LONG SERIES,
CENTRE CUTTING,
DIN 844 B
Range of application:
Recommended for milling in soft as well as
tough, long chipping materials such as Al- and
Cu-alloys as well as in thermo plastics.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
DIN 844 B
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
CENTRE CUTTING,
DIN 844 B
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
END MILLS, LONG SERIES,
DIN 844 B
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
STUB END MILLS, EXTRA
SHORT SERIES, CENTRE
CUTTING
Range of application:
Wide range of applications on materials of
medium strength up to high tensile strength
(~ 900–1.400 N/mm2), for example casehardening,
heat-treatable steels, alloyed tool
steel; hardened and tempered non-ferrous
metals, high temperature materials, also cast
iron and alloyed cast iron.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
DIN 844 B
Range of application:
Wide range of applications on materials of
medium strength up to high tensile strength
(~ 900–1.400 N/mm2), for example casehardening,
heat-treatable steels, alloyed tool
steel; hardened and tempered non-ferrous
metals, high temperature materials, also cast
iron and alloyed cast iron.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
CENTRE CUTTING, DIN 844 B
Range of application:
Wide range of applications on materials of
medium strength up to high tensile strength
(~ 900–1.400 N/mm2), for example casehardening,
heat-treatable steels, alloyed tool
steel; hardened and tempered non-ferrous
metals, high temperature materials, also cast
iron and alloyed cast iron.
Maykestag :: HSS Frézy
HPT END MILLS, SHORT
SERIES, CENTRE CUTTING,
DIN 844 B
Range of application:
Made from powder-metallurgical steel for
extreme cutting conditions for long continuous
utilisation. Wide range of applications on materials
of medium strength up to high tensile
strength (~ 900–1.400 N/mm2), for example
case-hardening, heat-treatable steels, alloyed
tool steel; hardened and tempered non-ferrous
metals, high temperature materials, also cast
iron and alloyed cast iron
Maykestag :: HSS Frézy
HPT ROUGHING END
MILLS, SHORT SERIES,
CENTRE CUTTING, DIN 844 B
Range of application:
Universal milling cutter with dynamic special
cord profile for roughing. Made from new substrate
SPM with extreme high content of
cobalt. It combines the hardness of solid carbide
and the toughness of powder-metallurgical
steel. This milling cutter is specially suitable
for highest requirements in cutting performance
and increase of cutting volume.
Maykestag :: HSS Frézy
HPT END MILLS, SHORT
SERIES, CENTRE CUTTING,
DIN 327 D
Range of application:
Made from new substrate SPM with extreme
high content of cobalt. It combines the hardness
of solid carbide and the toughness of
powder-metallurgical steel. This milling cutter
is specially suitable for highest requirements in
cutting performance and increase of cutting
volume in stainless steels
Maykestag :: HSS Frézy
HPT END MILLS, SHORT
SERIES, CENTRE CUTTING,
DIN 844 B
Range of application:
Made from new substrate SPM with extreme
high content of cobalt. It combines the hardness
of solid carbide and the toughness of
powder-metallurgical steel. This milling cutter
is specially suitable for highest requirements in
cutting performance and increase of cutting
volume in stainless steels.
Maykestag :: HSS Frézy
END MILLS, LONG SERIES,
DIN 844 B
Range of application:
Wide range of applications on materials of
medium strength up to high tensile strength
(~ 900–1.400 N/mm2), for example casehardening,
heat-treatable steels, alloyed tool
steel; hardened and tempered non-ferrous
metals, high temperature materials, also cast
iron and alloyed cast iron.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
THREE FLUTES, CENTRE
CUTTING, DIN 844 B
Range of application:
Recommended for milling in soft as well as in
tough, long chipping materials such as Al- and
Cu-alloys as well as in thermo plastics.
Maykestag :: HSS Frézy
END MILLS, LONG SERIES,
THREE FLUTES, CENTRE
CUTTING
Range of application:
Recommended for milling in soft as well as in
tough, long chipping materials such as Al- and
Cu-alloys as well as in thermo plastics.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
DIN 844 B
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
THREE FLUTES, CENTRE
CUTTING, DIN 844 B
Range of application:
Recommended for rough-milling in materials
with medium/high tensile strength up to
1.300 N/mm2. Suitable for face and peripheral
milling, smooth run guarantees high cutting
performance.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
MORSE TAPER SHANK,
DIN 845 B
Range of application:
Finishing with high cutting performance and
excellent surface on steels with medium to
high tensile strength up to 1.300 N/mm2 (for
example for structural, case-hardening, heattreatable
steels); non-ferrous metals, stainless
and acid resistant steels. Climb milling preferred.
Maykestag :: HSS Frézy
END MILLS, LONG SERIES,
MORSE TAPER SHANK,
DIN 845 B (C)
Range of application:
Finishing with high cutting performance and
excellent surface on steels with medium to
high tensile strength up to 1.300 N/mm2 (for
example for structural, case-hardening, heattreatable
steels); non-ferrous metals, stainless
and acid resistant steels. Climb milling preferred.
Maykestag :: HSS Frézy
END MILLS, SHORT SERIES,
MORSE TAPER SHANK,
DIN 845 B (C)
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
END MILLS, LONG SERIES,
MORSE TAPER SHANK,
DIN 845 B (C)
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
HPT DIE END MILLS,
CONICAL SERIES, FOUR
FLUTES
Range of application:
Finishing cutter for application groups H and N.
Maykestag :: HSS Frézy
DOVETAIL CUTTERS,
DIN 1833 C
Range of application:
Recommended for milling in construction
steels, tempered steels and cementation
steels with standard tensile strength up
to 1.100 N/mm2 and short-chipping of nonferrous
metals.
Maykestag :: HSS Frézy
DOVETAIL CUTTERS,
DIN 1833 D
Range of application:
Recommended for milling in construction
steels, tempered steels and cementation
steels with standard tensile strength up
to 1.100 N/mm2 and short-chipping of nonferrous
metals
Maykestag :: HSS Frézy
QUARTER CIRCLE CUTTERS,
DIN 6518 B
Range of application:
Recommended for milling in construction
steels, tempered steels and cementation
steels with standard tensile strength
up to 1.100 N/mm2 and short-chipping of
non-ferrous metals.
Maykestag :: HSS Frézy
QUARTER CIRCLE CUTTERS,
DIN 6518 B
Range of application:
Milling cutters for T-slots according to
DIN 650, staggered teeth. Recommended for
milling in construction steels, tempered steels
and cementation steels with standard tensile
strength up to 1.100 N/mm2 and short-chipping
of non-ferrous metals.
Maykestag :: HSS Frézy
T-SLOT MILLING CUTTERS,
DIN 851 AB
Range of application:
Milling cutters for T-slots according to
DIN 650 with roughing-finishing tooth system.
Recommended for milling in construction
steels, tempered steels and cementation
steels with standard tensile strength up to
1.300 N/mm2 and short-chipping of non-ferrous
metals.
Maykestag :: HSS Frézy
WOODRUFF KEYSEAT
CUTTERS, DIN 850 D
Range of application:
Recommended for milling in construction
steels, tempered steels and cementation
steels with standard tensile strength up to
1.100 N/mm2 and short-chipping of nonferrous
metals.
Maykestag :: HSS Frézy
SHORT SHANK CUTTERS
Range of application:
Recommended for milling in materials
with medium/high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
SHORT SHANK CUTTERS
Range of application:
Recommended for milling in materials
with medium/high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 841
Range of application:
Recommended for milling in heavy duty materials
up to a tensile strength of 1.300 N/mm2
as well as in rust- and acid-resistant steels,
titanium-alloyed materials etc.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 841
Range of application:
For hard, short chipping materials such as
cast iron, brass, bronze, alloyed tool steels.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 1880
Range of application:
Recommended for milling in heavy duty materials
up to a tensile strength of 1.300 N/mm2
as well as in rust- and acid-resistant steels,
titanium-alloyed materials and similars.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 1880
Range of application:
Recommended for milling in long chipping
materials, for example in Al- and Cu-alloys,
soft steels, thermo plastics and similars.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 841
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 841
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 1880
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 1880
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
SHELL END MILLS,
DIN 1880
Range of application:
Recommended for milling in heavy duty
materials with high tensile strength up to
1.300 N/mm2 as well as in titanium and
titanium-alloyed materials.
Maykestag :: HSS Frézy
SIDE MILLING CUTTERS,
STAGGERED TEETH,
DIN 885 A
Range of application:
Recommended for milling in construction
steels, tempered steels and cementation steels
up to a tensile strength of 1.100 N/mm2 as
well as in short-chipping non-ferrous metals.
Maykestag :: HSS Frézy
METAL SLITTING CUTTERS,
STAGGERED TEETH
Range of application:
Recommended for milling in hard, short-chipping
materials such as grey cast iron, brass,
bronze and alloyed tool steels.
Maykestag :: HSS Frézy
SINGLE ANGLE CUTTERS,
DIN 842 A
Range of application:
Recommended for milling straight slots and
guidances in construction-, cementation- and
tempered steels up to a tensile strength of
1.100 N/mm2.
Maykestag :: HSS Frézy
DOUBLE ANGLE CUTTERS,
DIN 847
Range of application:
Recommended for milling of prismatical slots
and guidances in construction-, cementationand
tempered steels up to a tensile strength of
1.100 N/mm2.
Maykestag :: HSS Frézy
HALF CIRCLE FORM CUTTERS,
RELIEVED, DIN 856
Range of application:
Convex cutters, relieved. Recommended for
milling semicircular slots in construction-,
cementation- and tempered steels up to a
tensile strength of 1.100 N/mm2.
Maykestag :: HSS Frézy
HALF CIRCLE FORM CUTTERS,
RELIEVED, DIN 855
Range of application:
Concave cutters, relieved. Recommended for
milling semicircular profiles in construction-,
cementation- and tempered steels up to a
tensile strength of 1.100 N/mm2.
Maykestag :: HSS Frézy
INVOLUTE GEAR CUTTERS,
RELIEVED,
PRESSURE ANGLE 20°
Range of application:
For milling spur gears by module.
Maykestag :: HSS Frézy
SPLINE CUTTERS,
RELIEVED,
DIN 9611, FORM 1
Range of application:
Suitable for milling special agricultural devices.
