SOLID CARBIDE END MILLS,
SHORT SERIES, TWO FLUTES
Range of application:
Recommended for milling in materials
with medium and high tensile strength
1.300 N/mm2. For drilling continued horizontal
milling with exact tolerances.
Produkty
Maykestag :: Karbidové Frézy
Maykestag :: Karbidové Frézy
.jpg)
SOLID CARBIDE END MILLS,
LONG SERIES, TWO FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling with exact tolerances.
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling with exact tolerances.
Maykestag :: Karbidové Frézy
.jpg)
SOLID CARBIDE END MILLS,
SHORT SERIES, THREE
FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling with exact tolerances.
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling with exact tolerances.
Maykestag :: Karbidové Frézy
.jpg)
SOLID CARBIDE END MILLS,
LONG SERIES, THREE FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength 1.300 N/mm2. For drilling continued by horizontal milling with exact tolerances.
Range of application: Recommended for milling in materials with medium and high tensile strength 1.300 N/mm2. For drilling continued by horizontal milling with exact tolerances.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS,
SHORT SERIES, FOUR FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength. Milling of slots with large depth, accurate fits as well as face and surface milling. High cutting performance in chipping and a smooth run result an excellent surface.
Range of application: Recommended for milling in materials with medium and high tensile strength. Milling of slots with large depth, accurate fits as well as face and surface milling. High cutting performance in chipping and a smooth run result an excellent surface.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS,
LONG SERIES, FOUR FLUTES
Range of application: Finishing with high cutting performance excellent surface on steels with medium high tensile strength (for example structural, case-hardening, heat-treatable steels); nonferrous metals, stainless and acid resistant steels. Climb milling preferred.
Range of application: Finishing with high cutting performance excellent surface on steels with medium high tensile strength (for example structural, case-hardening, heat-treatable steels); nonferrous metals, stainless and acid resistant steels. Climb milling preferred.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS,
LONG SERIES, TWO FLUTES,
DIN 6527L
Range of application: Recommended for milling in materials with medium and high tensile strength. Vertical cutting to full depth and horizontal cutting with exact tolerances.
Range of application: Recommended for milling in materials with medium and high tensile strength. Vertical cutting to full depth and horizontal cutting with exact tolerances.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS,
LONG SERIES, THREE FLUTES,
DIN 6527L
Range of application: Recommended for milling in materials with medium/high tensile strength. Milling of slots with large depth, accurate fits as well as face and surface milling. High cutting performance in chipping and a smooth run result in an excellent surface.
Range of application: Recommended for milling in materials with medium/high tensile strength. Milling of slots with large depth, accurate fits as well as face and surface milling. High cutting performance in chipping and a smooth run result in an excellent surface.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS,
LONG SERIES, FOUR FLUTES,
DIN 6527L
Range of application: Finishing with high cutting performance and excellent surface on steels with medium to high tensile strength (for example structural, case-hardening, heat-treatable steels); nonferrous metals, stainless and acid resistant steels. Climb milling preferred.
Range of application: Finishing with high cutting performance and excellent surface on steels with medium to high tensile strength (for example structural, case-hardening, heat-treatable steels); nonferrous metals, stainless and acid resistant steels. Climb milling preferred.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS,
LONG SERIES, THREE FLUTES,
DIN 6527L
Range of application: Recommended for milling in materials with medium and high tensile strength. Vertical cutting to full depth and horizontal cutting with exact tolerances.
Range of application: Recommended for milling in materials with medium and high tensile strength. Vertical cutting to full depth and horizontal cutting with exact tolerances.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS,
LONG SERIES, FOUR FLUTES,
DIN 6527L
Range of application: End mills, high helix angle with high contour accuracy due to low deflection, smooth milling operation because of low vibration in tendency, excellent surface quality.
Range of application: End mills, high helix angle with high contour accuracy due to low deflection, smooth milling operation because of low vibration in tendency, excellent surface quality.
Maykestag :: Karbidové Frézy
SOLID CARBIDE ROUGHING
END MILLS, LONG SERIES,
THREE FLUTES, DIN 6527L
Range of application: Wide range of applications on materials of medium strength up to high tensile strength (~ 900–1.400 N/mm2), for example casehardening, heat-treatable steels, alloyed tool steels; hardened and tempered non-ferrous metals, high temperature materials as well as cast iron and alloyed cast iron.
Range of application: Wide range of applications on materials of medium strength up to high tensile strength (~ 900–1.400 N/mm2), for example casehardening, heat-treatable steels, alloyed tool steels; hardened and tempered non-ferrous metals, high temperature materials as well as cast iron and alloyed cast iron.
Maykestag :: Karbidové Frézy
SOLID CARBIDE ROUGHING
END MILLS, LONG SERIES,
FOUR FLUTES, DIN 6527L
Range of application: Wide range of applications on materials of medium strength up to high tensile strength (~ 900–1.400 N/mm2), for example casehardening, heat-treatable steels, alloyed tool steels; hardened and tempered non-ferrous metals, high temperature materials as well as cast iron and alloyed cast iron.
Range of application: Wide range of applications on materials of medium strength up to high tensile strength (~ 900–1.400 N/mm2), for example casehardening, heat-treatable steels, alloyed tool steels; hardened and tempered non-ferrous metals, high temperature materials as well as cast iron and alloyed cast iron.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILL
“SPEEDCUT”, SHORT SERIES,
FOUR FLUTES, UNEQUAL
ANGLE OF SPIRAL
Range of application: Universal applicable: fine-finishing, finishing, rough finishing and roughing with the same tool. Unequal angle of spiral effects smooth, vibrationless running and excellent surface. High cutting performance.
Range of application: Universal applicable: fine-finishing, finishing, rough finishing and roughing with the same tool. Unequal angle of spiral effects smooth, vibrationless running and excellent surface. High cutting performance.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILL
“SPEEDCUT”, LONG SERIES,
FOUR FLUTES, UNEQUAL
ANGLE OF SPIRAL
Range of application: Universal applicable: fine-finishing, finishing, rough finishing and roughing with the tool. Unequal angle of spiral effects smooth, vibrationless running and excellent surface. High cutting performance.
Range of application: Universal applicable: fine-finishing, finishing, rough finishing and roughing with the tool. Unequal angle of spiral effects smooth, vibrationless running and excellent surface. High cutting performance.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILL
“SPEEDCUT”, EXTRA LONG
SERIES, RELIEVED, FOUR
FLUTES, UNEQUAL ANGLE OF
SPIRAL
Range of application: Universal applicable: fine-finishing, finishing, rough finishing and roughing with the same tool. Unequal angle of spiral effects smooth, vibrationless running and excellent surface. High cutting performance.
Range of application: Universal applicable: fine-finishing, finishing, rough finishing and roughing with the same tool. Unequal angle of spiral effects smooth, vibrationless running and excellent surface. High cutting performance.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILL
“SPEEDCUT” FOR INOX,
LONG SERIES, FOUR FLUTES,
UNEQUAL ANGLE OF SPIRAL
Range of application: High performance end mill especially suitable for cutting in austenitic stainless steels: finefinishing, finishing, rough finishing and roughing with the same tool. Unequal angle of spiral effects smooth, vibrationless running and excellent surface. High cutting performance.
Range of application: High performance end mill especially suitable for cutting in austenitic stainless steels: finefinishing, finishing, rough finishing and roughing with the same tool. Unequal angle of spiral effects smooth, vibrationless running and excellent surface. High cutting performance.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS
WITH REINFORCED STRAIGHT
SHANK, TWO FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength. Vertical cutting to full depth and horizontal cutting with exact tolerances.
Range of application: Recommended for milling in materials with medium and high tensile strength. Vertical cutting to full depth and horizontal cutting with exact tolerances.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS
WITH REINFORCED STRAIGHT
SHANK, THREE FLUTES
Range of application: Recommended for milling in materials with medium/high tensile strength. Milling of slots with large depth, accurate fits as well as face and surface milling. High cutting performance in chipping and a smooth run result in an excellent surface.
Range of application: Recommended for milling in materials with medium/high tensile strength. Milling of slots with large depth, accurate fits as well as face and surface milling. High cutting performance in chipping and a smooth run result in an excellent surface.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS
WITH REINFORCED STRAIGHT
SHANK, FOUR FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength. Milling of slots with large depth, accurate fits as well as face and surface milling. High cutting performance in chipping and a smooth run result an excellent surface.
Range of application: Recommended for milling in materials with medium and high tensile strength. Milling of slots with large depth, accurate fits as well as face and surface milling. High cutting performance in chipping and a smooth run result an excellent surface.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI END
MILLS WITH REINFORCED
STRAIGHT SHANK, SHORT
SERIES, TWO FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling, especially suited for copy milling.
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling, especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI END
MILLS WITH REINFORCED
STRAIGHT SHANK, LONG
SERIES, TWO FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling, especially suited for copy milling.
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling, especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI END
MILLS WITH REINFORCED
STRAIGHT SHANK, LONG
SERIES, THREE FLUTES
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling, especially suited for copy milling.
Range of application: Recommended for milling in materials with medium and high tensile strength up to 1.300 N/mm2. For drilling continued by horizontal milling, especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI END
MILLS WITH REINFORCED
STRAIGHT SHANK, LONG
SERIES, FOUR FLUTES
Range of application: Finishing with high cutting performance and excellent surface on steels with medium to high tensile strength (for example structural, case-hardening, heat-treatable steels); nonferrous metals, stainless and acid resistant steels. Climb milling preferred.
Range of application: Finishing with high cutting performance and excellent surface on steels with medium to high tensile strength (for example structural, case-hardening, heat-treatable steels); nonferrous metals, stainless and acid resistant steels. Climb milling preferred.
Maykestag :: Karbidové Frézy
SOLID CARBIDE BALL NOSE
END MILLS, SHORT SERIES,
TWO FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE BALL NOSE
END MILLS, LONG SERIES,
TWO FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE BALL NOSE
END MILLS, SHORT SERIES,
THREE FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE BALL NOSE
END MILLS, SHORT SERIES,
FOUR FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE BALL NOSE
END MILLS, SHORT SERIES,
FOUR FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI BALL
NOSE END MILLS WITH REINFORCED
STRAIGHT SHANK,
SHORT SERIES, TWO FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI BALL
NOSE END MILLS WITH REINFORCED
STRAIGHT SHANK,
LONG SERIES, TWO FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI BALL
NOSE END MILLS WITH REINFORCED
STRAIGHT SHANK,
LONG SERIES, THREE FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI BALL
NOSE END MILLS WITH REINFORCED
STRAIGHT SHANK,
LONG SERIES, FOUR FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling
Maykestag :: Karbidové Frézy
SOLID CARBIDE QUARTER
CIRCLE CUTTERS
Range of application: Recommended for milling in construction steels, tempered steels and cementation steels with standard tensile strength up to 1.100 N/mm2 and short-chipping of non-ferrous metals.
Range of application: Recommended for milling in construction steels, tempered steels and cementation steels with standard tensile strength up to 1.100 N/mm2 and short-chipping of non-ferrous metals.
Maykestag :: Karbidové Frézy
SOLID CARBIDE DEBURRING
MILLS, 60°
Range of application: Universal range of application, especially suited for chamfering and deburring as well as contouring.
Range of application: Universal range of application, especially suited for chamfering and deburring as well as contouring.
Maykestag :: Karbidové Frézy
SOLID CARBIDE DEBURRING
MILLS, 90
Range of application: Universal range of application, especially suited for chamfering and deburring as well as contouring.
Range of application: Universal range of application, especially suited for chamfering and deburring as well as contouring.
Maykestag :: Karbidové Frézy
SOLID CARBIDE BALL NOSE
END MILLS, SHORT SERIES,
TWO FLUTES
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Range of application: Recommended for milling materials with medium/high tensile strength. Especially suited for copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS
FOR HARD MACHINING
> 45 HRC, SHORT SERIES,
NEGATIVE RAKE ANGLE
Range of application: For milling hardened steels of more than 45 HRC (with negative rake angle). Especially suited for dry-cutting.
Range of application: For milling hardened steels of more than 45 HRC (with negative rake angle). Especially suited for dry-cutting.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS
FOR HARD MACHINING
> 45 HRC, LONG SERIES,
NEGATIVE RAKE ANGLE
Range of application: For milling hardened steels of more than 45 HRC (with negative rake angle). Especially suited for dry-cutting.
Range of application: For milling hardened steels of more than 45 HRC (with negative rake angle). Especially suited for dry-cutting.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS
FOR HARD MACHINING
< 45 HRC, SHORT SERIES,
POSITIVE RAKE ANGLE
Range of application: Finishing with high cutting performance and excellent surface on steels with a hardness up to 45 HRC (for example structural, casehardening, heat-treatable steels). Climb milling preferred.
Range of application: Finishing with high cutting performance and excellent surface on steels with a hardness up to 45 HRC (for example structural, casehardening, heat-treatable steels). Climb milling preferred.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS
FOR HARD MACHINING
< 45 HRC, LONG SERIES,
POSITIVE RAKE ANGLE
Range of application: Finishing with high cutting performance and excellent surface quality by steels with tensile strength up to 45 HRC (for example structural, case-hardening, heat-treatable steels). Climb milling preferred.
Range of application: Finishing with high cutting performance and excellent surface quality by steels with tensile strength up to 45 HRC (for example structural, case-hardening, heat-treatable steels). Climb milling preferred.
Maykestag :: Karbidové Frézy
SOLID CARBIDE TORUS END
MILLS, SHORT SERIES, TWO
FLUTES
Range of application: Torus end mills for materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Range of application: Torus end mills for materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE TORUS END
MILLS, LONG SERIES, TWO
FLUTES
Range of application: Torus end mills for materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Range of application: Torus end mills for materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE TORUS END
MILLS, SHORT SERIES, FOUR
FLUTES
Range of application: Torus end mills for materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Range of application: Torus end mills for materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE TORUS END
MILLS, LONG SERIES, FOUR
FLUTES
Range of application: Torus end mills for materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Range of application: Torus end mills for materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI END
MILLS, TWO FLUTES
Range of application: Recommended for milling materials with medium and high tensile strength, HSC-milling
Range of application: Recommended for milling materials with medium and high tensile strength, HSC-milling
Maykestag :: Karbidové Frézy
SOLID CARBIDE MINI BALL
NOSE END MILLS, TWO
FLUTES
Range of application: For milling materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Range of application: For milling materials with medium/high tensile strength. Especially suited for HSC-copy milling.
Maykestag :: Karbidové Frézy
SOLID CARBIDE DIE END
MILLS, CONICAL SERIES
Range of application: Finishing cutter for application groups H and N, constant spiral angle.
Range of application: Finishing cutter for application groups H and N, constant spiral angle.
Maykestag :: Karbidové Frézy
SOLID CARBIDE END MILLS
FOR ALUMINIUM, SHORT
SERIES, TWO FLUTES
Range of application: Recommended for milling aluminium and aluminium-alloys, plastics copper-alloys and non-ferrous metals.
Range of application: Recommended for milling aluminium and aluminium-alloys, plastics copper-alloys and non-ferrous metals.
Maykestag :: Karbidové Frézy
SOLID CARBIDE BALL NOSE
END MILLS FOR ALUMINIUM,
SHORT SERIES, TWO FLUTES
Range of application: Recommended for copy milling aluminium and aluminium-alloys, plastics copper-alloys and non-ferrous metals.
Range of application: Recommended for copy milling aluminium and aluminium-alloys, plastics copper-alloys and non-ferrous metals.
Maykestag :: Karbidové Frézy
SOLID CARBIDE TORUS END
MILLS FOR ALUMINIUM,
SHORT SERIES, TWO FLUTES
Range of application: Especially suited for copy milling aluminium and aluminium-alloys.
Range of application: Especially suited for copy milling aluminium and aluminium-alloys.
Maykestag :: Karbidové Frézy
SOLID CARBIDE TORUS END
MILLS FOR ALUMINIUM,
LONG SERIES, TWO FLUTES
Range of application: Especially suited for copy milling aluminium and aluminium-alloys.
Range of application: Especially suited for copy milling aluminium and aluminium-alloys.
Maykestag :: Karbidové Frézy
SOLID CARBIDE 1-FLUTE END
MILLS FOR ALUMINIUM
Range of application: Right-hand cutting with right-hand spiral. Especially suited for cutting aluminium and aluminium-alloys.
Range of application: Right-hand cutting with right-hand spiral. Especially suited for cutting aluminium and aluminium-alloys.
Maykestag :: Karbidové Frézy
SOLID CARBIDE 1-FLUTE
MINI END MILLS FOR ALUMINIUM
Range of application: Right-hand cutting with right-hand spiral. Especially suited for cutting aluminium and aluminium-alloys.
Range of application: Right-hand cutting with right-hand spiral. Especially suited for cutting aluminium and aluminium-alloys.
Maykestag :: Karbidové Frézy
SOLID CARBIDE 1-FLUTE END
MILLS FOR PLASTIC, RIGHTHAND
CUTTING WITH RIGHTHAND
SPIRAL
Range of application: Especially suited for cutting all plastics, glassfibre reinforced polyester as well as graphite.
Range of application: Especially suited for cutting all plastics, glassfibre reinforced polyester as well as graphite.
Maykestag :: Karbidové Frézy
SOLID CARBIDE 1-FLUTE END
MILLS FOR PLASTIC, RIGHTHAND
CUTTING WITH LEFTHAND
SPIRAL
Range of application: Especially suited for cutting all plastics, glassfibre reinforced polyester as well as graphite.
Range of application: Especially suited for cutting all plastics, glassfibre reinforced polyester as well as graphite.
Maykestag :: Karbidové Frézy
SOLID CARBIDE CONTOUR
END MILLS FOR PLASTICS,
CYLINDRICAL
Range of application: Especially suitable for cutting glass-fibre and carbon-fibre-reinforced plastics „GFP“ and „CFP“.
Range of application: Especially suitable for cutting glass-fibre and carbon-fibre-reinforced plastics „GFP“ and „CFP“.
Maykestag :: Karbidové Frézy
SOLID CARBIDE CONTOUR
END MILLS FOR PLASTICS,
WITH FRONT CUT
Range of application: Especially suitable for cutting glass-fibre and carbon-fibre-reinforced plastics „GFP“ and „CFP“.
Range of application: Especially suitable for cutting glass-fibre and carbon-fibre-reinforced plastics „GFP“ and „CFP“.
Maykestag :: Karbidové Frézy
SOLID CARBIDE CONTOUR
END MILLS FOR PLASTICS,
TWO FLUTES
Range of application: Especially suitable for cutting glass-fibre and carbon-fibre-reinforced plastics „GFP“ and „CFP“.
Range of application: Especially suitable for cutting glass-fibre and carbon-fibre-reinforced plastics „GFP“ and „CFP“.
Maykestag :: Karbidové Frézy
SOLID CARBIDE CONTOUR
END MILLS FOR PLASTICS,
WITH DRILLING TIP
Range of application: Especially suitable for cutting glass-fibre and carbon-fibre-reinforced plastics „GFP“ and „CFP“.
Range of application: Especially suitable for cutting glass-fibre and carbon-fibre-reinforced plastics „GFP“ and „CFP“.